How to repair the broken hole of PVC pipe?

需要准备小钢锯、PVC管、砂纸、抹布、竹节接头和胶水。先用小钢锯把PVC管破洞处锯掉，用砂纸把新的管口打磨一下，用抹布擦拭一下打磨处，用专用胶水涂在管口处，在竹节接头内也涂上胶水，把端口和竹节连接起来，在接缝处再涂上适量的胶水即可。

Small hacksaw, PVC pipe, abrasive paper, rag, bamboo joint and glue shall be prepared. First, use a small hacksaw to cut the broken hole of the PVC pipe, use sandpaper to polish the new pipe orifice, use a rag to wipe the polished part, apply special glue to the pipe orifice, and also apply glue to the bamboo joint, connect the port with the bamboo joint, and then apply appropriate amount of glue to the joint.

具体操作如下：The specific operation is as follows:

1、先用小钢锯把PVC管破洞处锯掉。First use a small hacksaw to cut the hole of the PVC pipe.

2、用砂纸把新的管口打磨一下。Grind the new nozzle with sandpaper.

3、用抹布擦拭一下打磨处。Wipe the polished part with a rag.

4、用专用胶水涂在管口处。Apply special glue to the nozzle.

5、在竹节接头内也涂上胶水。Glue is also applied to the bamboo joint.

6、把端口和竹节连接起来。Connect the port with the bamboo joint.

7、在接缝处再涂上适量的胶水即可。Apply proper amount of glue on the joint.

Recommand products from TDD:

PVC Resin SG-3

BILLIONS Rutile Titanium Dioxide BLR-601